OVERVIEW

The HHT35SUKCT trimmer is designed to be versatile and heavy duty, suited for both homeowners and professional landscapers alike. Powered by the Honda GX35, a Mini 4-stroke, overhead cam engine it proves to be the most powerful Honda trimmer yet. The HHT35SUKCT delivers, power, easy use and quiet operation for a more pleasant operating experience.

The bike-type handlebars — standard on the HHT35SUKCT — provide increased leverage, and control and comfort. This trimmer comes standard with a manual, line-feed trimmer, nylon cutting head, a 50-tooth, steel-brush cutting blade, safety goggles, blade barrier, double harness and blade-mounting hardware. This trimmer’s innovative and heavy-duty design means it can withstand daily use all season long, while remaining light and manoeuvrable.

Warranty

As a testament to their quality and reliability, all Honda trimmers come with a warranty of 24 months for non-commercial use and 12 months for commercial use.

SPECIFICATIONS

ENGINE TYPE: MINI 4-STROKE; OHC; SINGLE CYLINDER AIR COOLED MULTI-POSITION (360°)
ENGINE MODEL: GX35
DISPLACEMENT: 35.8 CC (2.18 CID)
BORE AND STROKE: 39 X 30 MM (1.5 X 1.2 IN)
MAXIMUM NET TORQUE: 1.6 N•M (1.20 LBF-FT) @ 5;500 RPM
IDLE SPEED: 3;100 ± 200 RPM
MAX. NO-LOAD RPM¥¥ (REQUIRES BLADE BARRIER): 10;000 RPM
IGNITION SYSTEM: TRANSISTORIZED FLYWHEEL MAGNETO (ELECTRONIC)
SPARK PLUG: CMR5H (NGK)
COOLING SYSTEM: FORCED AIR
STARTING SYSTEM: RECOIL STARTER
STOPPING SYSTEM: IGNITION PRIMARY CIRCUIT GROUND
CARBURETOR: DIAPHRAGM TYPE W/FUEL PUMP
RECOMMENDED FUEL: REGULAR UNLEADED GASOLINE (87 OCTANE)
FUEL PRIMER: ANTI-FLOOD TYPE
FUEL CAPACITY: 0.65 LITRE (22.9 FL. IMP. OZ)
FUEL CONSUMPTION (APPROXIMATE)***: 0.7 LITRE/HR (0.15 IMP. GAL/HR)
CLUTCH DRIVE TYPE: CENTRIFUGAL TWIN SHOE-CLUTCH
CLUTCH SIZE: 78 MM (3 1/16 IN) DIAMETER
CLUTCH ENGAGEMENT: 4;200 ± 200 RPM
AIR CLEANER: SEMI-DRY TYPE
LUBRICATION SYSTEM: OIL MIST
OIL CAPACITY: 100 CC (3.52 FL. IMP. OZ)
RECOMMENDED OIL: SAE 10W30 API SERVICE CLASSIFICATION SJ OR LATER
HANDLE TYPE: U-SHAPED (BIKE TYPE HANDLE)
THROTTLE CONTROL TYPE: TWO-MOTION TRIGGER TYPE
ENGINE STOP SWITCH: SLIDE TYPE SWITCH
CUTTING HEAD (STANDARD): MANUAL LINE FEED NYLON
CUTTING HEAD (OPTIONAL): EMI-MATIC; PRO-TAP
CUTTING WIDTH: 43.2 CM (17.0 IN)
LINE TYPE: ULTRA-QUIET
CUTTING LINE DIAMETER: 2.41 MM (0.095 IN) OR 2.67 MM (0.105 IN)
ANTI-VIBRATION SYSTEM: STANDARD
DRIVE SHAFT TYPE: FLEXIBLE STEEL CABLE
FINAL DRIVE GEAR: CASE HELICAL CUT BEVEL GEARS / SEALED BALL BEARINGS
GEAR RATIO: 1.235 INPUT SHAFT: 1 (OUTPUT SHAFT)
MAIN PIPE DIAMETER: 25.4 MM (1.0 IN)
MAIN PIPE THICKNESS / MATERIAL: 1.5 MM (.06 IN) / ALUMINUM
TRIMMER GUARD WITH CUTTER: STANDARD
STEEL BLADE GUARD: STANDARD
SHOULDER HARNESS: N/A
PROFESSIONAL DOUBLE LOOP HARNESS: STANDARD
SAFETY GOGGLES (A.N.S.I STD.): STANDARD
BLADE: STD. (50-T X 25.4 CM / 10.0 IN) STEEL BRUSH CUTTING
BLADE BARRIER KIT¥: STANDARD
OVERALL LENGTH WITH CUTTER MOUNTED: 190.5 CM (75.0 IN)
OVERALL WIDTH (HANDLEBARS): 60.0 CM (23.6 IN)
OVERALL HEIGHT: 40.5 CM (15.9 IN)
DRY WEIGHT WITHOUT BLADES: 7.00 KG (15.4 LB)